×
Description
Easy & Quick

Built in 1 hour

VASP

Ready

Ultra lightweight

only 20 kg

Features

  • A table in seconds: pop up a 46 x 43 cm surface for meals, coffee or your laptop, then fold it away.
  • Room for everything: three doors and an adjustable shelf for clothes, food and kit.
  • Water on board, if you want it: add our Standard Water Kit and its two 13 L jerrycans fit inside, so you can wash up and brush your teeth in the van. The basin goes at the back or the front.
  • Slim, so the bed stays wide: at 34.5 cm deep, it leaves room for a Slide bed with a 120 cm-wide mattress beside it.
  • Storage you can actually reach: two doors stay accessible even with the bed pulled out, so there’s no need to pack away your bed just to get your clothes.
  • Built in about an hour: CNC-cut parts, pre-drilled hinge holes, pre-routed push lock recesses and the basin cut-outs etched under the worktop, so there’s nothing to measure. A screwdriver, wood glue and tape are all you need.
  • Light by design: 20 kg of poplar plywood, so your van keeps saving you money at the pump. Delivered raw for you to oil, varnish or paint.

×

What does the side table unit do?

The Simple Vans side table unit gives a Peugeot Expert / Citroën Jumpy 3 three things in one cabinet: storage, a table and, with our water kit, running water. It stands beside the bed along the side of the van, with storage behind three doors and a 46 x 43 cm table that pops up for breakfast, a meal or an hour on the laptop, then folds away.

The side table unit has space for the Standard Water Kit’s two jerrycans, and you can put the basin at the back or the front of the worktop. Two of the three doors stay accessible even when the bed is pulled out, so you don’t have to fold the bed away or move the cushions to reach your clothes at night. Push locks keep the doors shut on the road.

The side table unit is designed to be simple to build: hinge holes are pre-drilled, the push lock recesses are pre-routed so every lock goes in the right place first time, and the basin cut-outs are etched under the worktop, so you know exactly where to cut. There are versions cut to the walls of the VW Transporter T5/T6, Renault Trafic 3 and Peugeot Expert / Citroën Jumpy 3; the Adaptable version is the one for every other medium L1 van, and for those three if the walls have timber cladding or thick lining, or the floor is higher than 18 mm.

×

What does the side table unit work with?

Slide bed

At 34.5 cm deep, the side table unit leaves room for the bed to pull out alongside.

K1 front kitchen

The same 75 cm height as the side table unit, so the two line up in a Drifter layout.

Two 13 L jerrycans, a 33 x 26 cm basin, a 12 V pump, a shower head and all hoses and fittings. Sold separately; included in some Deluxe kits.

Kits that include it

The Minimalist (bed and side table unit), the Drifter (bed, side table unit and K1 front kitchen) and the Cruiser (bed with a fixed bench, side table unit and K5 rear kitchen).

×

Key facts about the side table unit

Range, typeSimple CLASSIC side cabinet with pop-up table
FitsPeugeot Expert 3 and Citroën Jumpy 3 (2016 onwards), Toyota Proace (2016 onwards), Opel/Vauxhall Vivaro C (2019 onwards) and Fiat Scudo (2022 onwards), size M (L1H1, about 4.95 m long); not size XS
Dimensions116 cm long, 34.5 cm deep, 75 cm high
StorageThree doors, adjustable shelf
Table46 x 43 cm pop-up top
Weight20 kg
Materials, hardwarePoplar plywood (10 mm for cabinets), Simple Slots joinery, nickel-plated steel hinges, push locks; delivered raw to oil, varnish or paint
AssemblyAbout 1 hour; screwdriver, wood glue and tape; screws and fixing brackets included
DIY level2/10
Price€599
Works withSlide bed, K1 front kitchen, Standard Water Kit
Delivery26 European countries (not the UK or Ireland)
×

Dimensions and assembly

DIY level2/10
12345678910

On a scale where building your own furniture from scratch is 10.

Tools
screwdriver, wood glue, tape
Cuts
none

The side table unit for the Peugeot Expert / Citroën Jumpy 3 is 116 cm long, 34.5 cm deep and 75 cm high, and weighs 20 kg. It arrives flat-packed and CNC-cut, with screws and fixing brackets included. Assembly takes about an hour with a screwdriver, wood glue and tape. The step-by-step assembly guide and video are online.

×

Which version do I need?

Choose the Peugeot Expert / Citroën Jumpy 3 version if your van has standard plywood wall lining (up to 5 mm) and a wooden floor up to 18 mm thick: it is cut to follow the Expert and Jumpy’s walls.

Choose the Adaptable version if your walls have timber cladding or thicker lining, if your floor is higher than 18 mm, or if your van isn’t listed; it fits with one or two simple jigsaw cuts.

There are also versions for the VW Transporter T5/T6 and the Renault Trafic 3, and a large side cabinet for L2 vans.

Read moreShow less
Product Details
A24

Data sheet

Collection
Simple CLASSIC
Type
Individual Units
Model
Expert/Jumpy 3
Van size
L1 / Short wheelbase
Assembly time
1 hour

Side Table Unit L1 - A2 Side unit with table for Peugeot Expert / Citroën Jumpy 3 (size M)

The Simple Vans side table unit is a side cabinet for the Peugeot Expert and Citroën Jumpy 3 in size M (L1), with storage behind three doors and a 46 x 43 cm pop-up table. Add our Standard Water Kit and one cabinet does the work of three: breakfast at the table, clothes within reach and a basin for the washing up.

See our Buyer's Guide

Read moreShow less
€599.00 (tax incl.)
Check compatibility with my van
Close
Estimated SHIPPING between 10/12/2026 and 17/12/2026
  • Satisfied or your money back* *See the conditions
  • Compatible with Peugeot Expert / Citroën Jumpy 3 (size M) L1
  • Step-by-step guided assembly
  • Videos + human support included

Frequently asked questions

No. The Standard Water Kit is sold separately for €279 and is included in some Deluxe kits. It has two 13 L jerrycans, a basin, a 12 V pump, a shower head and all the fittings, and it drops into the side table unit.

Yes. The basin can go at the back or the front of the worktop. The cut-outs are etched under the worktop, so you don’t need to measure.

Yes. Two of the side table unit’s three doors still open when the bed is pulled out, so you can reach your things at night.

No. This version is for size M (L1H1, about 4.95 m long). Size XS is too short for our kits, and size XL (L2) takes the large side cabinet for L2 vans.

Yes, it covers two of the four things VASP needs: a table and storage. Your van also needs a kitchen area with a cooking point and a bed, which the Drifter kit adds with the K1 front kitchen and the Slide bed.

Included with every Simple Vans unit

You can build your van.
We make sure you succeed.

You’re not just buying plywood furniture: you’re buying a system that takes the unknowns out of your build, before, during and after.

Verified compatibility

Designed for your van model: confirm the fit in our Van Selector before you order.

Proven design

3,000+ beds delivered since 2020: you’re not the test build.

Precision cutting

CNC-cut parts and Simple Slots joinery: everything lines up.

Clear assembly plan

A step-by-step guide, from flat pack to fitted.

Step-by-step videos

Watch each step before you do it yourself.

Human support

A real person answers within 48 business hours, and often much sooner, when something isn’t clear.

Problem? Solved.

A missing or faulty part? We send a replacement free, delivery included.

Satisfied or refunded*

30 days to return unused furniture, so the risk isn’t all yours.
*See the conditions

Your project. Our system. Your success.

From your order to the road

1

Order your unit

Your van’s version or the Adaptable one, plus any add-ons. Dispatched by 17/12/2026.

2

Receive your flat-pack unit

Pre-cut panels and fixings, with an online assembly guide.

3

Assemble it in about 1 hour

A screwdriver, wood glue and tape are all you need, plus a jigsaw for a few simple cuts on Adaptable versions. Simple Slots joinery guides each step.

They converted their van with Simple Vans

Our best argument: the enthusiastic feedback from vanlifers!

★★★★★

Très contente !

La non-bricoleuse que je suis s’en tire avec l’aménagement de ses rêves ! Première nuit dans le van… J’ai très bien dormi ! Merci au service clientèle également, réactif et sympathique. Ravie d’avoir fait confiance à Simple Vans !

AAnne-Cécile R.

★★★★★

Un kit bois qui fait gagner du temps !

Un kit bois prédécoupé bien emballé, solide, de bonne qualité et bien pensé qui me fait économiser beaucoup de temps pour l’aménagement de mon utilitaire. Chacun peut y apporter sa touche personnelle en termes de finition. Aucun problème de montage, les étapes et conseils sont parfaits sur les notices.

DDenis V.

★★★★★

Un lit formidable !

Premier roadtrip en van et je n’ai jamais aussi bien dormi ! Un lit pratique et confortable, avec beaucoup de rangement.

RRosane C.

Made in our workshop
in the Landes

Poplar plywood, precise CNC cutting and a careful hand finish. Start with one unit and add more later: every unit comes out and goes with you to your next van.

Poplar plywood

Light and strong, harvested within 300 km of our workshop. Our poplar plywood is sourced from a PEFC chain-of-custody certified supplier.

CNC cutting, Simple Slots joinery

A precise fit and a quick build.

Finished by hand

Every unit is finished and checked by hand in our workshop in the Landes.

Menu

MENU