×
Description
Easy & Quick

Built in 1 hour

VASP

Ready

Ultra lightweight

only 10.5 kg

Features

  • Cook inside or out. A two-burner stove sits on the top drawer, mounted on runners: pull it out to cook, push it back when you’re done.
  • A table that’s also a door. Open the rear doors and fold up the 59 x 37 cm outdoor worktop: chopping board, coffee station or wine bar. It’s cut from the side of the unit, so folding it up also opens a 15 to 20 cm cubby behind the fridge for a bin or supplies.
  • A home for your fridge. A ventilated space underneath for a 50 L front-opening fridge, so cold drinks are always within reach of the stove.
  • A place for every pan. Deep storage for bottles, oils and cookware, plus a smaller space for cutlery and gas cartridges.
  • Compact footprint. Just 67 x 41.5 cm of floor by the back doors, so the rest of the van stays yours.
  • Quick to build. CNC-cut parts, pre-drilled hinge holes and pre-routed push lock recesses, so there’s nothing to measure. A screwdriver, wood glue and tape are all you need.
  • Light by design. About 10.5 kg of poplar plywood, so your van keeps saving you money at the pump. Delivered raw for you to oil, varnish or paint.

×

What does the K5 rear kitchen do?

The K5 rear kitchen puts a compact cooking corner by the back doors of a VW Transporter T5/T6. A two-burner camping stove sits on the top drawer, mounted on runners, so you just pull it out to cook. Open the rear doors, fold up the 59 x 37 cm worktop, and the kitchen works from outside too. The worktop is cut from the side of the unit, so folding it up also opens a 15 to 20 cm cubby behind the fridge, for a bin or supplies.

Underneath, a 50 L front-opening fridge stays fixed in place in its own ventilated space. Deep storage holds bottles, oils and pans, with a smaller space for cutlery and gas cartridges.

There are versions cut to the VW Transporter T5/T6, Renault Trafic 3 and Peugeot Expert / Citroën Jumpy 3; the Adaptable version is for every other medium van, L1 or L2, and for those three if you’ve changed the wall profile.

×

What does the K5 work with?

Stove

The top drawer takes a two-burner camping stove up to 60 x 33 x 15 cm, like the Campingaz Camping Cook (not included). In the Cruiser kit, the side table unit limits the drawer opening to 45 cm.

Fridge

A 50 L front-opening fridge, like the Dometic, BOO CR50l or Carbest 50 L models (not included).

The same 75 cm height as our side cabinet with a pop-up table, so the worktops line up.

Kits that include it

The Cruiser (Slide Standard Bench, side table unit and K5 rear kitchen).

×

Key facts about the K5 rear kitchen

Range, typeSimple CLASSIC rear kitchen unit
FitsVW Transporter T5 (2003 to 2015), T6 (2015 to 2019) and T6.1 (2019 to 2024), L1 panel vans. Not the all-new Transporter from 2025
Dimensions60 cm long, 41.5 cm deep, 75 cm high
CookingSliding drawer for a two-burner camping stove up to 60 x 33 x 15 cm
Worktop59 x 37 cm fold-up outdoor worktop, which also opens a 15 to 20 cm cubby behind the fridge
Cold storageVentilated space for a 50 L front-opening fridge
WeightAbout 10.5 kg
Materials, hardwarePoplar plywood, Simple Slots joinery, push locks; delivered raw to oil, varnish or paint. Our poplar plywood is sourced from a PEFC chain-of-custody certified supplier.
AssemblyAbout 1 hour; screwdriver, wood glue and tape
DIY level2/10
Price€499
Works withSlide Standard Bench, side cabinet with a pop-up table, Cruiser kit
Not includedStove, fridge
Delivery26 European countries (not the UK or Ireland)
×

Dimensions and assembly

DIY level2/10
12345678910

On a scale where building your own furniture from scratch is 10.

Tools
screwdriver, wood glue, tape
Cuts
none

The K5 rear kitchen is 60 cm long, 41.5 cm deep and 75 cm high, and weighs about 10.5 kg. It arrives flat-packed and CNC-cut, with the hinge holes pre-drilled and the push lock recesses pre-routed. Assembly takes about 1 hour with a screwdriver, wood glue and tape. The step-by-step assembly guide and video are online.

×

Which version do I need?

Choose the Adaptable version if your van has no dedicated version, or if you’ve changed its wall profile: it fits with a few simple jigsaw cuts at the rear door pillar and wheel arch.

Choose a van-specific version (VW Transporter T5/T6, Renault Trafic 3, Peugeot Expert / Citroën Jumpy 3) if your van has its standard wall lining: it’s cut to fit, with no cuts to make.

Read moreShow less
Product Details
K52

Data sheet

Collection
Simple CLASSIC
Type
Individual Units
Model
T5/T6
Van size
L1 / Short wheelbase
Assembly time
1 hour

Rear Kitchen - K5 Rear kitchen unit for VW Transporter T5/T6 (L1)

Your kitchen, with a view. The Simple Vans K5 is a rear kitchen cut to fit the VW Transporter T5/T6 L1, with a sliding top drawer for a two-burner stove, a fold-up outdoor worktop and a ventilated space underneath for a fridge, all in a compact footprint. Swing open the back doors, and the view comes with every meal.

See our Buyer's Guide

Read moreShow less
€499.00 (tax incl.)
Check compatibility with my van
Close
Estimated SHIPPING between 05/12/2026 and 12/12/2026
  • Satisfied or your money back* *See the conditions
  • Compatible with Volkswagen Transporter T5/T6 L1
  • Step-by-step guided assembly
  • Videos + human support included

Frequently asked questions

The top drawer takes a two-burner camping stove up to 60 x 33 x 15 cm, like the Campingaz Camping Cook. In the Cruiser kit, the side table unit limits the drawer opening to 45 cm. The stove isn’t included.

A 50 L front-opening fridge, like the Dometic or Carbest 50 L models, sits fixed in place in a ventilated space underneath. The fridge isn’t included.

Yes. Open the rear doors and fold up the 59 x 37 cm worktop, and the K5 becomes an outdoor kitchen.

No. This version is cut to fit your VW Transporter T5/T6, so a screwdriver, wood glue and tape are all you need.

Yes. The T6.1 (2019 to 2024) belongs to the same family as the T5 and T6, so this version fits it. The all-new Transporter from 2025 is a different van: choose the Adaptable version.

Yes. Our furniture is modular, so the K5 joins a Slide bed and a side cabinet you already have. It’s the kitchen in the Cruiser.

Included with every Simple Vans unit

You can build your van.
We make sure you succeed.

You’re not just buying plywood furniture: you’re buying a system that takes the unknowns out of your build, before, during and after.

Verified compatibility

Designed for your van model: confirm the fit in our Van Selector before you order.

Proven design

3,000+ beds delivered since 2020: you’re not the test build.

Precision cutting

CNC-cut parts and Simple Slots joinery: everything lines up.

Clear assembly plan

A step-by-step guide, from flat pack to fitted.

Step-by-step videos

Watch each step before you do it yourself.

Human support

A real person answers within 48 business hours, and often much sooner, when something isn’t clear.

Problem? Solved.

A missing or faulty part? We send a replacement free, delivery included.

Satisfied or refunded*

30 days to return unused furniture, so the risk isn’t all yours.
*See the conditions

Your project. Our system. Your success.

From your order to the road

1

Order your unit

Your van’s version or the Adaptable one, plus any add-ons. Dispatched by 12/12/2026.

2

Receive your flat-pack unit

Pre-cut panels and fixings, with an online assembly guide.

3

Assemble it in about 1 hour

A screwdriver, wood glue and tape are all you need, plus a jigsaw for a few simple cuts on Adaptable versions. Simple Slots joinery guides each step.

They converted their van with Simple Vans

Our best argument: the enthusiastic feedback from vanlifers!

★★★★★

Très contente !

La non-bricoleuse que je suis s’en tire avec l’aménagement de ses rêves ! Première nuit dans le van… J’ai très bien dormi ! Merci au service clientèle également, réactif et sympathique. Ravie d’avoir fait confiance à Simple Vans !

AAnne-Cécile R.

★★★★★

Un kit bois qui fait gagner du temps !

Un kit bois prédécoupé bien emballé, solide, de bonne qualité et bien pensé qui me fait économiser beaucoup de temps pour l’aménagement de mon utilitaire. Chacun peut y apporter sa touche personnelle en termes de finition. Aucun problème de montage, les étapes et conseils sont parfaits sur les notices.

DDenis V.

★★★★★

Un lit formidable !

Premier roadtrip en van et je n’ai jamais aussi bien dormi ! Un lit pratique et confortable, avec beaucoup de rangement.

RRosane C.

Made in our workshop
in the Landes

Poplar plywood, precise CNC cutting and a careful hand finish. Start with one unit and add more later: every unit comes out and goes with you to your next van.

Poplar plywood

Light and strong, harvested within 300 km of our workshop. Our poplar plywood is sourced from a PEFC chain-of-custody certified supplier.

CNC cutting, Simple Slots joinery

A precise fit and a quick build.

Finished by hand

Every unit is finished and checked by hand in our workshop in the Landes.

Menu

MENU