×

Simple Floor · Coming soon

Your camper conversion starts here.

A precision-cut campervan floor for your van – flat-packed into a manageable box and ridiculously easy to assemble.

For the VW Transporter T5/T6 L1

How close is Simple Floor?

Almost ready. Not quite yet.

Simple Floor for the VW Transporter T5/T6 L1 is on the home straight. We’re taking the time to fine-tune the last details so it drops straight into your van, first time. Join the waiting list and we’ll let you know as soon as orders open.

  1. Done

    Designed for the VW T5/T6 L1

    Drawn from the van’s real shape, wheel arches included.

  2. Done

    Prototype assembled and fitted

    The full floor, battens included, tested in a real van.

  3. In progress

    Final tweaks

    We’re fine-tuning the details before the first production run.

  4. Coming soon

    Orders open

    People on the waiting list hear first.

Skip the first DIY headache.

Building your own campervan should be fun.
Making the floor usually isn’t.

The old way

  1. Buy giant sheets of plywood.
  2. Somehow get them home.
  3. Make cardboard templates.
  4. Measure the van.
  5. Measure it again.
  6. Transfer everything to plywood.
  7. Cut around the wheel arches.
  8. Test fit it.
  9. Doesn’t fit.
  10. Trim it.
  11. Still doesn’t fit.
  12. Swear.
  13. Trim it again.

The Simple way

Open the box.

Pre-cut, numbered sections and battens, flat-packed.

Glue the support battens onto your van’s floor.

With a construction adhesive like Sikaflex, no drilling into the metal. They lock together with lap joints at every crossing.

Add insulation between the supports.

10 mm self-adhesive Armaflex, cut to fit each cell.

Drop in the Simple Floor panels.

Glued and screwed into the battens, with the screws in the box.

Move on.

Lay your vinyl or LVT, then your furniture.

No measuring. No templating. No cutting.

So… how does a van floor fit in a box?

Simple Floor arrives in manageable, precision-cut sections that slot together to create a full-size campervan floor and support system for your insulation.

Think ridiculously easy jigsaw puzzle. Except at the end, you’ve built your van’s floor and sub-floor.

Simple Floor battens crossing with a lap joint on a van floor

Simple lap joints

Precision CNC-cut joints create strong, accurate connections.

CNC-cut dovetail joint between two battens

Guide slots

Everything lines up exactly where it should. No measuring or guesswork. (This is genius for the subfloor.)

Simple Floor section being fitted in a VW T6

Manageable pieces

No wrestling with giant sheets of plywood. Everything arrives flat-packed and ready to assemble.

Simple Floor cut precisely around the wheel arches of a VW T6

Built for your van. Not “close enough.”

Vans aren’t nice, square wooden boxes.

Wheel arches, curves and the shape of the floor pan turn what looks like a simple job into a surprisingly fiddly one.

So we’ve already done the difficult bit.

Simple Floor is designed around the actual dimensions and features of each specific van model, then precision CNC-cut in our workshop in France.

  • You don’t measure it.
  • You don’t template it.
  • You don’t cut it.
  • You assemble it.
  • You fit it.
  • You get on with your build.

Everything you need to get off the ground.

Your Simple Floor kit will include:

Fitting a poplar plywood floor panel

Precision-cut floor

15 mm poplar plywood, pre-cut to fit your van.

Pre-cut battens engraved with their numbers, laid on the van floor

Floor battens

Pre-cut battens support the floor while creating space for 10 mm Armaflex insulation underneath.

Batten engraved “4-3” with its dovetail joint

Flat-pack joint system

Our lap joints and guide slots turn multiple manageable sections into one full-size floor.

Finished Simple Floor in a VW T6, tailgate open

Ready for your build

Once installed, you’ve got a solid, properly shaped foundation ready for the next stage of your conversion.

Not in the box: insulation (10 mm Armaflex, ideally self-adhesive), wood glue and your floor covering. The screws are included.

Starting with a Classic kit? Even better.

Simple Floor is the perfect foundation for our Classic campervan kits.

Fitting Simple Floor in a VW T6: panels at the front, battens still visible at the back

Simple Floor

Floor + battens

Classic kit fitted in a van: bench, kitchen and storage

Classic kit

Bed · Kitchen · Storage

Converted van parked in a forest, rear doors open

Your camper

Built by you.

No custom furniture. No plywood templates. No workshop full of tools.

Just a much simpler way to build your own campervan.

Soon available as an add-on to your T5/T6 L1 Classic kit. Your floor arrives precision-cut, your furniture arrives flat-packed: you assemble both and skip a big chunk of the traditional fabrication work.

CNC router cutting plywood in the Simple Vans workshop

Designed and made by Simple Vans.

Simple Floor is made in France by the same team behind our modular campervan furniture systems.

  • Precision CNC-cut

    Designed around the actual van rather than a generic rectangle.

  • Poplar plywood

    Lightweight, strong and ideal for campervan construction.

  • Flat-pack engineering

    A full-size campervan floor transformed into manageable pieces you can assemble yourself.

  • Made for self-builders

    Professional design without needing a professional workshop.

We do the precision work. You build the camper.

Coming soon for your VW T5/T6 L1.

Planned launch price, tax included.

Coming soonSimple Floor fitted in a VW T6, Simple Vans box on the floor, tailgate open

VW Transporter T5/T6 L1

Short wheelbase · Floor + battens

€399

Incl. tax, planned price

Notify me

Waiting list

Be the first to know.

Tell us what you drive. We email you the day your floor goes on sale.

  • One email the day orders open.
  • That’s it – no weekly newsletter (unless you want it!)
  • Free, no strings attached.

Join the waiting list

Your email and your van, that’s all.

Form not showing? Write to us with your van model and we’ll add you to the waiting list.

Renault Trafic, Peugeot Expert, Citroën Jumpy, Ford Transit Custom and other vans

Not a T5 or T6?

We started with the VW Transporter. We’re not stopping there.

Every van has its own wheel arches, its own curves and its own floor pan, so every Simple Floor has to be designed and cut from scratch. We work through the list one vehicle at a time.

The vans we hear about most are the ones we cut next. Tell us yours in the same form.

Frequently asked questions

Very soon. Simple Floor for the VW Transporter T5/T6 is on the home straight, but we won’t give a date until everything is exactly right. Join the waiting list and we’ll let you know as soon as orders open.

At launch, the VW Transporter T5/T6 L1. Other van models will be decided by demand: tell us what you drive to get notified.

No power tools and no cutting tools. You’ll need a caulking gun for the construction adhesive that bonds the battens to your van’s floor, a screwdriver for the included screws that fix the panels down, and your own wood glue for the panel-to-batten fixing.

No. You’ll need 10 mm Armaflex (or equivalent). Self-adhesive versions are widely sold for van conversions and make fitting straightforward: trim to size, peel, stick.

Simple Floor is a structural subfloor, not a finished surface. We recommend a generic vinyl floor roll: lightweight, waterproof and simple to fit yourself with a neoprene contact adhesive. Pre-assembling the floor outside the van first gives you a template to cut the vinyl against before it goes in.

Yes. It’s designed to pair with our Classic kits and will be available as an add-on at checkout as soon as it launches.

French-sourced poplar plywood: 15 mm for the floor panel, with pre-cut 10 mm battens underneath for insulation clearance.

Simple Floor

The easiest way to start your camper conversion.

No templates. No cutting. No giant sheets of plywood.

Precision-cut. Flat-packed. Built by you.

Build simple. Roam free.

Menu

MENU